IMPORTANT INFORMATION.
It is important not to focus on the numerical size of the conventional footwear you usually wear (e.g., size 38), but on the number of cm your feet measure (24.2cm). Below, we explain how to measure your feet correctly.
- It is very important to measure your foot as thoroughly as possible to get the right size.
- Measure your foot from the heel to the longest toe. It does not necessarily have to be the big toe.
- It is important to measure the length of both feet.
- Take the measurement while standing.
- Pay close attention to the size guide for each model, as they vary.
- In the size guide, you need to find the size that best fits your foot after adding the recommended margin.
📏 About the length of the LIVANA model
The shoe should NOT fit tightly. You must ensure there is an adequate margin between your foot and the shoe so that your foot can expand and contract freely. For this model, we recommend leaving a margin of between 0.6cm and 1cm for the foot on narrow/normal feet, and up to 1.2 cm on very wide feet.
📏About the width of the LIVANA model
The Livana model is made from Flyknit fabric, a soft, elastic and adaptable material that easily conforms to the shape of your foot. Thanks to this design, the shoe does not impose a rigid structure on your toes or on the width of your foot; instead, it expands and adapts, providing comfort for both narrower and wider feet.
👉 Why do we offer a range of widths in our size guide?
Because Flyknit fabric allows for width measurement tolerance. Therefore, if your foot is within or close to the indicated range, the shoe will very likely adapt well to your natural shape without causing pressure or restriction.
👉 What if your foot is wider than the maximum range indicated?
In many cases, yes, it could still fit thanks to the elasticity of the material, especially if there are no sensitive areas (such as prominent bunions or discomfort on the side of the foot). If you have any questions, write to us and we’ll be happy to help you confirm the ideal size.
What is my size?
- Place your foot on the paper on a flat, smooth surface. Position the paper and your heel against the wall. Use a pencil to mark the point furthest from your foot (it does not necessarily have to be the big toe). Measure both feet.
- Measure the distance between the bottom edge of the paper and the line drawn with the pencil. This will be the actual length of your foot.
- You can also draw the outline of your foot on a sheet of paper.
- We recommend choosing the shoe that leaves an extra margin of 0.5cm-0.7cm compared with the length of your foot. Remember that the length shown in the table is the measurement of the inside of the shoe.
