WHICH SIZE SHOULD I CHOOSE?

IMPORTANT! THIS MODEL FEATURES A THERMAL INNER LINING. YOU NEED TO LEAVE MORE SPACE THAN USUAL WHEN CHOOSING YOUR SIZE.

 

Do not use your usual size as a guide. Measure your feet in centimeters and use that measurement to find your size.

The measurement shown in the table corresponds to the interior shoe length,

Why do you need more space?

Unlike other barefoot models, ATLAS shoes feature a thermal inner lining that takes up some of the available space inside the shoeTherefore, it is important to add more space than usual to prevent the footwear from feeling too tight.

Recommended allowance for ATLAS:

• Narrow or standard-width foot: add 1 cm to the length of your foot.

• Wide or very wide foot: add up to 1.5 cm.

If you plan to wear them with thick socks, also take into account the space they occupy.

Please note: the insole is a reference for choosing the size, but it does not represent all the available interior space. Due to the shoe's construction, there is a small amount of additional space both at the toe and in the heel area.

The measurement indicated in the table corresponds to the insole interior length: 

SIZE	INSOLE LENGTH	INTERIOR WIDTH
36	23.7 CM	9.4 CM
37	24.4 CM	9.5 CM
38	25 CM	9.8 CM
39	25.7 CM	9.9 CM
40	26.4 CM	10.1 CM
41	27.1 CM	10.2 CM
42	27.8 CM	10.3 CM
43	28.4 CM	10.7 CM
44	29.1 CM	10.9 CM
45	29.8 CM	11.2 CM

EXAMPLE

If your longer foot measures 24.2 cm, look for a size that leaves approximately 0.7–1 cm of space.

In this model, size 38 measures 25 cm, so I would leave 0.8 cm of extra space, which may be appropriate for a standard-width foot. 

HOW TO MEASURE YOUR FEET

1. Stand on a sheet of paper
Place your heel against a wall. The paper should also touch the wall.

2. Mark the longest toe
It does not have to be the big toe.

3. Measure from the edge of the paper to the mark
Do this for both feet and always use the measurement of the longest foot.

4. Measure while wearing the socks you will use
Especially for winter models or if you wear thick socks.

5. Add the necessary allowance
Barefoot footwear should not fit tightly. We recommend leaving 0.7–1 cm for narrow or average-width feet and up to 1.3 cm for very wide feet.

IMPORTANT

✓ Always measure both feet.
✓ Take the measurement while standing.
✓ Use your longest foot as a reference.
✓ Do not automatically choose your usual size.
✓ Your toes should have room to move and spread out.

Are you between two sizes?
Check both the length and width of your foot. If you still have questions, write to us and we will help you choose.

Also consult our complete guide on how to measure your feet:

How to measure your foot to choose barefoot footwear

Do you need help?
Write to us at contacto@rootsbarefoot.com